Mel Flynn
2009-06-12 03:21:58 UTC
Moving from -questions to -multimedia. snd_hda is in kernel config, yet no
trace of sound on boot. Kernel is edited kernel, even though named "GENERIC".
Using snd_hda_load="YES" in loader.conf also does not load the module. Module
can however be loaded after boot.
Bernt, could you also provide kldstat -v |grep -E '(sound|snd)' (without
loading the module)?
trace of sound on boot. Kernel is edited kernel, even though named "GENERIC".
Using snd_hda_load="YES" in loader.conf also does not load the module. Module
can however be loaded after boot.
Bernt, could you also provide kldstat -v |grep -E '(sound|snd)' (without
loading the module)?
hdac0: <ATI SB600 High Definition Audio Controller> mem
0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
hdac0: HDA Codec #3: Realtek ALC885
hdac1: <ATI (Unknown) High Definition Audio Controller> mem
0xfdffc000-0xfdffffff irq 19 at device 0.1 on pci1
hdac1: HDA Driver Revision: 20090329_0131
hdac1: [ITHREAD]
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 3 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 3 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 3 nid 1 on hdac0
pcm3: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Thu Jun 11 21:56:24 CEST 2009
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (3214.65-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 8575365120 (8178 MB)
avail memory = 8273797120 (7890 MB)
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem
0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB363 SATA300 controller> port
0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f
mem 0xfddfe000-0xfddfffff irq 18 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
atapci1: <ATI IXP600 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f
mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16
at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17
at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18
at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17
at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18
at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq
19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, video> at device 6.0 (no driver attached)
pci3: <multimedia> at device 6.1 (no driver attached)
dc0: <82c169 PNIC 10/100BaseTX> port 0xce00-0xceff mem
0xfdcff000-0xfdcff0ff irq 21 at device 7.0 on pci3
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:5a:a3:77
dc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <COMPAQ DVD-ROM GD-2000/0056> at ata0-master PIO4
ad1: 114472MB <WDC WD1200JB-00CRA1 17.07W17> at ata0-slave UDMA100
ad4: 953868MB <SAMSUNG HD103UJ 1AA01110> at ata2-master SATA300
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad1s3 is ntfs/ntfs.
GEOM_LABEL: Label for provider ad1s4 is msdosfs/FAT.
GEOM_LABEL: Label for provider ad4s3 is ufsid/48a93e3fd9d64de0.
GEOM_LABEL: Label for provider ad1s2a is ufsid/49da69da39c6c4ee.
GEOM_LABEL: Label for provider ad1s2d is ufsid/473a1e7c3f059e1f.
GEOM_LABEL: Label for provider ad1s2e is ufsid/49e45638b6aaf1b7.
GEOM_LABEL: Label for provider ad1s2f is ufsid/49e455a5b1492ff9.
GEOM_LABEL: Label for provider ad1s2g is ufsid/49e455a51b4aecce.
Trying to mount root from ufs:/dev/ad1s2a
GEOM_LABEL: Label ufsid/49da69da39c6c4ee removed.
GEOM_LABEL: Label for provider ad1s2a is ufsid/49da69da39c6c4ee.
GEOM_LABEL: Label ufsid/49e455a5b1492ff9 removed.
GEOM_LABEL: Label for provider ad1s2f is ufsid/49e455a5b1492ff9.
GEOM_LABEL: Label ufsid/48a93e3fd9d64de0 removed.
GEOM_LABEL: Label for provider ad4s3 is ufsid/48a93e3fd9d64de0.
GEOM_LABEL: Label ufsid/49e455a51b4aecce removed.
GEOM_LABEL: Label for provider ad1s2g is ufsid/49e455a51b4aecce.
GEOM_LABEL: Label ufsid/473a1e7c3f059e1f removed.
GEOM_LABEL: Label for provider ad1s2d is ufsid/473a1e7c3f059e1f.
GEOM_LABEL: Label ufsid/49e45638b6aaf1b7 removed.
GEOM_LABEL: Label for provider ad1s2e is ufsid/49e45638b6aaf1b7.
GEOM_LABEL: Label ufsid/49da69da39c6c4ee removed.
GEOM_LABEL: Label ufsid/49e455a5b1492ff9 removed.
GEOM_LABEL: Label ufsid/49e455a51b4aecce removed.
GEOM_LABEL: Label ufsid/473a1e7c3f059e1f removed.
GEOM_LABEL: Label msdosfs/FAT removed.
GEOM_LABEL: Label ufsid/49e45638b6aaf1b7 removed.
GEOM_LABEL: Label ufsid/48a93e3fd9d64de0 removed.
dc0: dc_setcfg: failed to force tx to idle state
dc0: dc_setcfg: failed to force tx to idle state
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the handbook section on
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-conf
ig.html #
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.484.2.19 2009/04/14 00:35:56
jfv Exp $
cpu HAMMER
ident GENERIC
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options KDTRACE_FRAME # Ensure frames are compiled in
#options KDTRACE_HOOKS # Kernel DTrace hooks
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs! device miibus # MII bus support
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
#device wlan_scan_ap # 802.11 AP mode scanning
#device wlan_scan_sta # 802.11 STA mode scanning
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
#device ath_hal # Atheros HAL (Hardware Access Layer)
#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
#device ath_rate_sample # SampleRate tx rate control for ath
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device ural # Ralink Technology RT2500USB wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Serial devices
#device ucom # Generic com ttys
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device ubser # BWCT console serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
#device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
# Ljud
device sound
device snd_hda
0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
hdac0: HDA Codec #3: Realtek ALC885
hdac1: <ATI (Unknown) High Definition Audio Controller> mem
0xfdffc000-0xfdffffff irq 19 at device 0.1 on pci1
hdac1: HDA Driver Revision: 20090329_0131
hdac1: [ITHREAD]
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 3 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 3 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 3 nid 1 on hdac0
pcm3: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Thu Jun 11 21:56:24 CEST 2009
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (3214.65-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 8575365120 (8178 MB)
avail memory = 8273797120 (7890 MB)
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem
0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB363 SATA300 controller> port
0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f
mem 0xfddfe000-0xfddfffff irq 18 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
atapci1: <ATI IXP600 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f
mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16
at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17
at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18
at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17
at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18
at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq
19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, video> at device 6.0 (no driver attached)
pci3: <multimedia> at device 6.1 (no driver attached)
dc0: <82c169 PNIC 10/100BaseTX> port 0xce00-0xceff mem
0xfdcff000-0xfdcff0ff irq 21 at device 7.0 on pci3
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:5a:a3:77
dc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <COMPAQ DVD-ROM GD-2000/0056> at ata0-master PIO4
ad1: 114472MB <WDC WD1200JB-00CRA1 17.07W17> at ata0-slave UDMA100
ad4: 953868MB <SAMSUNG HD103UJ 1AA01110> at ata2-master SATA300
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad1s3 is ntfs/ntfs.
GEOM_LABEL: Label for provider ad1s4 is msdosfs/FAT.
GEOM_LABEL: Label for provider ad4s3 is ufsid/48a93e3fd9d64de0.
GEOM_LABEL: Label for provider ad1s2a is ufsid/49da69da39c6c4ee.
GEOM_LABEL: Label for provider ad1s2d is ufsid/473a1e7c3f059e1f.
GEOM_LABEL: Label for provider ad1s2e is ufsid/49e45638b6aaf1b7.
GEOM_LABEL: Label for provider ad1s2f is ufsid/49e455a5b1492ff9.
GEOM_LABEL: Label for provider ad1s2g is ufsid/49e455a51b4aecce.
Trying to mount root from ufs:/dev/ad1s2a
GEOM_LABEL: Label ufsid/49da69da39c6c4ee removed.
GEOM_LABEL: Label for provider ad1s2a is ufsid/49da69da39c6c4ee.
GEOM_LABEL: Label ufsid/49e455a5b1492ff9 removed.
GEOM_LABEL: Label for provider ad1s2f is ufsid/49e455a5b1492ff9.
GEOM_LABEL: Label ufsid/48a93e3fd9d64de0 removed.
GEOM_LABEL: Label for provider ad4s3 is ufsid/48a93e3fd9d64de0.
GEOM_LABEL: Label ufsid/49e455a51b4aecce removed.
GEOM_LABEL: Label for provider ad1s2g is ufsid/49e455a51b4aecce.
GEOM_LABEL: Label ufsid/473a1e7c3f059e1f removed.
GEOM_LABEL: Label for provider ad1s2d is ufsid/473a1e7c3f059e1f.
GEOM_LABEL: Label ufsid/49e45638b6aaf1b7 removed.
GEOM_LABEL: Label for provider ad1s2e is ufsid/49e45638b6aaf1b7.
GEOM_LABEL: Label ufsid/49da69da39c6c4ee removed.
GEOM_LABEL: Label ufsid/49e455a5b1492ff9 removed.
GEOM_LABEL: Label ufsid/49e455a51b4aecce removed.
GEOM_LABEL: Label ufsid/473a1e7c3f059e1f removed.
GEOM_LABEL: Label msdosfs/FAT removed.
GEOM_LABEL: Label ufsid/49e45638b6aaf1b7 removed.
GEOM_LABEL: Label ufsid/48a93e3fd9d64de0 removed.
dc0: dc_setcfg: failed to force tx to idle state
dc0: dc_setcfg: failed to force tx to idle state
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the handbook section on
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-conf
ig.html #
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.484.2.19 2009/04/14 00:35:56
jfv Exp $
cpu HAMMER
ident GENERIC
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options KDTRACE_FRAME # Ensure frames are compiled in
#options KDTRACE_HOOKS # Kernel DTrace hooks
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs! device miibus # MII bus support
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
#device wlan_scan_ap # 802.11 AP mode scanning
#device wlan_scan_sta # 802.11 STA mode scanning
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
#device ath_hal # Atheros HAL (Hardware Access Layer)
#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
#device ath_rate_sample # SampleRate tx rate control for ath
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device ural # Ralink Technology RT2500USB wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Serial devices
#device ucom # Generic com ttys
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device ubser # BWCT console serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
#device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
# Ljud
device sound
device snd_hda
--
Mel
Mel